Strip Line.
Linear LED for low ceilings. 20 to 72 W.Low-wattage linear LED fixture for stockrooms, workshops, service corridors and parking garages. A switch sets wattage and CCT in the field; it surface mounts to the ceiling and is ETL listed for damp locations.
Pick your Strip Line.
Length at order; wattage and CCT in the field.Two lengths with the same 120° round frosted polycarbonate diffuser: 4FT, 20 to 40 W, and 8FT, 30 to 72 W. Wattage and color temperature are changed with the switch on the fixture, without changing products.
Lumen output for each configuration per the laboratory IES files, with the 120° round frosted polycarbonate diffuser: up to 155 lm/W and 10,147 lm. The scene is illustrative; actual levels depend on mounting height and spacing.
Light, rigid
and field adjustable.Cold-rolled steel (SPCC) housing with a white finish, a round frosted polycarbonate diffuser and a switch for wattage and CCT. Slim 2.97 in profile, with ½ in knockouts on the end caps and housing.
STRIP LINE
LED LINEAR LOW BAY · 20 TO 72 W
Full light when someone is there,
a low level when no one is.With the optional microwave sensor, the Strip Line goes to 100 % when it detects motion and, after a period with no one present, steps down to a standby level instead of staying at full output. Ideal for corridors, service rooms and parking garages that sit empty for hours.
Two lengths. One diffuser.
The 4FT is 48.0 in long and weighs 3.26 lb; the 8FT is 96.0 in long and weighs 6.06 lb. Both are 2.48 in wide and 2.97 in tall. Wattage and CCT are set with the switch.
4FT · 8FT · 20–72 W
48.0 / 96.0 in · 2.48 × 2.97 in · 3.26 / 6.06 lb
Surface or suspended.
It fixes directly to the ceiling and covers the junction box, or hangs from a chain or V-hook (accessory). Optional: decorative junction-box plate, emergency battery (4 or 8 W; 15 W on request) and bi-level sensor.
06 — SPECIFIERS
Everything to specify it.
Listed and verifiable.
Download the spec sheet, the installation guide and the 50 IES files (4FT and 8FT, every wattage and CCT) for your DIALux or AGi32 layout.
Spec sheet
PDF · ENGLISH (US)
↓
IES
IES files
ZIP · 50 FILES · LM-63
↓
Installation guide
PDF · ENGLISH (US)
↓
DLX
Photometric study
FREE · FOR YOUR PROJECT
→
UL 1598
INTERTEK · ETL LISTED
ETL listed to the UL 1598 standard for damp locations.
Verify with Intertek →
DAMP
Damp locations
UL CLASSIFICATION
Covered parking garages, service rooms and areas with condensation.
07 — FAQ
About the Strip Line
Have another question? An advisor will answer you on WhatsApp.
What does “damp location” mean?
What does “damp location” mean?
It is the UL rating for areas with humidity or condensation that are protected from direct water spray: covered parking garages, service rooms and unconditioned stockrooms. The Strip Line is ETL listed for damp locations; with its IP20 rating it is not meant for washdown.
How do I change the wattage and CCT?
How do I change the wattage and CCT?
With the two switches on the side of the housing, with the power off: 5 wattages (20 to 40 W on the 4FT, 30 to 72 W on the 8FT) and 5 CCTs from 3000 to 6500 K. It ships at maximum wattage and 6500 K.
How does the bi-level sensor work?
How does the bi-level sensor work?
It is an optional microwave sensor that mounts on the diffuser. It brings the fixture to 100 % when it detects motion and, after a period with no one present, steps it down to a standby level. It is ordered as an accessory.
Is it certified?
Is it certified?
Yes. It is ETL listed (Intertek) to UL 1598 for damp locations and is TAA compliant.
Does it offer emergency backup?
Does it offer emergency backup?
Yes, with an optional 4 W (4FT only) or 8 W battery, and 15 W on request, that keeps emergency lighting on during a power outage. It is chosen in the ordering code.
08 — COMPLETE YOUR PLANT
Related products
STRIP LINE
How many Strip Line fixtures does your plant need?
We run a free photometric layout for your stockrooms, workshops, corridors and parking areas and help you choose the length, wattage and CCT.