HOME / INDOOR / LOW BAY / CANOPY
LOW BAY · CANOPY · WET LOCATIONS

Canopy.

Built for canopies: up to 22,500 lm at 150 lm/W.

Low-profile LED canopy light for fuel and diesel stations, underground and covered parking garages, covered loading docks and industrial park gatehouses, at mounting heights under 20 ft. Die-cast A383 aluminum housing, 110° borosilicate glass optic, IP65 + IK08, and an I version with Jungo Connect One installed at the factory.

Up to 150 lm/W IP65 · IK08
Jungo Connect Pro Jungo Connect One
4 MODELS · 75–150 W TAA · USMCA Canopy luminaria LED para gasolineras y techumbres - Jungo Lighting
4 Models SO / MO / HO / SHO4MODELSSO·MO·HO·SHO
75–150 W
2 CCT 4000K / 5000K · factory set2CCTFACTORY4000K5000K
4000 · 5000 K
0-10V Dimmable
0–10 V
Wet Location Rated
IP65 · IK08
Configure it here ↓
16 COMBINATIONS WHEN ORDERING
FOUR MODELS SO · MO · HO · SHO · 75 to 150 W
CCT WHEN ORDERING 4000 · 5000 K
I VERSION JUNGO CONNECT ONE FACTORY-INSTALLED
Jungo Connect Pro
Jungo Connect One App and web · Networked lighting controls
EFFICACY Up to 150 lm/W Over 70% energy savings vs. conventional lighting
VOLTAGE 100–277 V~ 50/60 Hz · 0–10 V dimming
PROTECTION IP65 · IK08 Wet location rated · 4 kV surge protection
MAX. OUTPUT 22,500 lm SHO model · 150 W
WEIGHT 9.7 to 10.4 lb 15.12 × 15.12 × 2.76 in · A383 aluminum
01 — CONFIGURATION

Choose your Canopy.

Model, CCT and controls when ordering.

Four models from 75 to 150 W, all at 150 lm/W: SO at 11,250 lm, MO at 15,000 lm, HO at 19,500 lm and SHO at 22,500 lm. Model, color temperature (4000 or 5000 K) and controls (N, no controls, or I, with Jungo Connect One installed at the factory) are set when ordering, so the fixture arrives ready to install.

CONFIGURATION COMBINATION 8 OF 16
Wattage FIXED PER MODEL
75 W 100 W 130 W 150 W
Color temperature CHOSEN WHEN ORDERING
4000 K 5000 K —
Controls CHOSEN WHEN ORDERING
I · With JCO N · None
Model CHOSEN WHEN ORDERING
SO · 75 W MO · 100 W HO · 130 W SHO · 150 W —
Daylight, 5000 K. Crisp light for fueling islands, loading docks and camera-monitored entrances. I version · Jungo Connect One. Occupancy and daylight sensor factory-installed on the 3-pin receptacle.
YOUR CONFIGURATION CL-MO-50-I · 100 W · 5000 K
WATTAGE 100 W
LUMEN OUTPUT 15,000 lm 150 lm/W · PER SPEC SHEET
COLOR TEMPERATURE 5000 K
JUNGO CONNECT ONE Factory-installed

Lumen output for each model per the 2026 spec sheet: 150 lm/W across all four models and both color temperatures, with a 110° borosilicate glass optic. The scene is illustrative; we run a free photometric layout for your project.

02 — CONSTRUCTION

Slim and rugged,

built for open-air canopies.

Die-cast A383 aluminum housing with an internal heat sink, white finish and a profile of just 2.76 in. The borosilicate glass optic will not yellow and withstands heat and UV; the fixture is IP65 for wet locations and IK08 impact rated.

Canopy vista inferior: aluminio A383 fundido a presión - Jungo Lighting
Die-cast A383 aluminum White housing with an internal heat sink that draws heat away from the LEDs.
Canopy · loop construcción · techumbre con lluvia · póster - Jungo Lighting CANOPY LED CANOPY LIGHT · 75 TO 150 W
Canopy vista lateral: perfil de 70 mm - Jungo Lighting
IP65 + IK08 · 2.76 in Sealed for wet locations and impact resistant, in a profile just 2.76 in tall.
Canopy óptica de vidrio borosilicato a 110 grados - Jungo Lighting
Borosilicate glass optic A 110° distribution that will not yellow and withstands heat and UV. CRI > 80 and flicker-free on camera.
EFFICACY Up to 150 lm/W Power factor ≥ 0.90, THD < 20%, 4 kV surge protection and 0–10 V dimming included.
Canopy con Jungo Connect One en la base de 3 pines - Jungo Lighting
I VERSION · JUNGO CONNECT ONE Jungo Connect One, factory-installed On the I version, the Jungo Connect One sensor ships installed on the 3-pin receptacle: microwave occupancy sensing, daylight harvesting and app or web control. See how Jungo Connect works ↓
03 — JUNGO CONNECT® · NETWORKED LIGHTING CONTROLS

Light only

where it is needed.

The Canopy I version ships with the Jungo Connect One sensor installed on its 3-pin receptacle: Bluetooth Mesh connectivity, a microwave occupancy sensor and a daylight sensor. You set the rules in the app or the web platform: how far to dim, after how many minutes with no presence and what light level to hold.

01
Occupancy Microwave sensor · dims when the area is empty
02
Daylight Light sensor · on at sunset, off in daylight
● UNDERGROUND PARKING TIME-LAPSE
ACTIVE RULE Dim to 20% after 5 min with no presence. Back to 100% on motion.
MICROWAVE SENSOR No presence
NO PRESENCE 00:00
POWER · CANOPY MO
20 W 20 %
EMPTY AREA · AUTO DIM −80% ENERGY
0 W POWER RIGHT NOW 100 W
SAMPLE NIGHT · 7 PM TO 7 AM How your Canopy works through a night at a fuel station
NO OCCUPANCY
1 min 5 min 10 min 15 min
VACANCY LEVEL
Off 10 % 20 % 50 %
Night chart (power vs. occupancy)
Occupancy detected
Luminaire power
AVERAGE POWER THROUGH THE NIGHT 52 W 52% OF FULL POWER · PER FIXTURE instead of 100 W all night. That is 48% less energy, automatically and with no schedules to program. Calculate your savings →
Bluetooth Mesh® (SIG Mesh) Every luminaire extends the network. No control wiring.
Microwave sensor Detects occupancy and applies your rule: dim or turn off after X minutes.
Illuminance sensor Measures daylight and holds your target lux level.
App and web platform Wi-Fi, Ethernet or 4G with the H20 Gateway. Rules by zone, 24/7.
04 — TECHNICAL SPECIFICATIONS

Four models. One footprint.

All four models measure 15.12 × 15.12 × 2.76 in; the SO and MO weigh 9.7 lb, and the HO and SHO, 10.4 lb. Model, CCT and controls are chosen when ordering.

SO · 75 W 11,250 lm
MO · 100 W 15,000 lm
HO · 130 W 19,500 lm
SHO · 150 W 22,500 lm
— —
DIMENSIONS AND WEIGHT 15.12 × 15.12 × 2.76 in
SO and MO: 9.7 lb · HO and SHO: 10.4 lb
RATED WATTAGE 100 W · model MO
LUMINOUS EFFICACY 150 lm/W across all four models
LUMEN OUTPUT 15,000 lm (MO · 100 W)
CCT (WHEN ORDERING) 4000 K / 5000 K
OPTIC Borosilicate glass · 110°
INPUT VOLTAGE 100–277 V~ · 50/60 Hz
MATERIALS Die-cast A383 aluminum with internal heat sink · borosilicate glass · white finish
POWER FACTOR · THD ≥ 0.90 · < 20%
RATED LIFE L70 > 72,000 h (TM-21)
CRI · FLICKER > 80 · flicker-free
PROTECTION IP65 · IK08 · wet location rated
SURGE · OPERATING TEMP. 4 kV · −22 to 122 °F
MOUNTING Surface (bracket included) · 1 in pendant pipe (not included)
WARRANTY 5 years · 10 years extended
CONTROLS 0–10 V dimming · I version with factory-installed Jungo Connect One
COMPLIANCE TAA compliant · USMCA compliant
ORDERING CODE CL-MO-50-I Code: CL-[SO|MO|HO|SHO]-[40|50]-[N|I]. 40 = 4000 K and 50 = 5000 K; N = no controls and I = Jungo Connect One factory-installed on the 3-pin receptacle. Surface mounting bracket included.
DIMENSIONS AND WEIGHT
Canopy dimensions 15.12 x 15.12 x 2.76 in - Jungo Lighting SO · MO · HO · SHO 15.12 × 15.12 × 2.76 in · 9.7 to 10.4 lb
05 — MOUNTING AND ACCESSORIES

Surface or pendant pipe.

Surface mount it to the canopy deck with the included bracket (4 bolts with nuts) or hang it from a 1 in pendant pipe, not included. A safety cable is provided, and the I version ships with Jungo Connect One factory-installed.

Canopy en montaje sobrepuesto en techumbre de gasolinera - Jungo Lighting
Surface mount INCLUDED
Bracket with 4 bolts and nuts to fix the fixture directly to the canopy deck or structure. BRACKET INCLUDED IN THE BOX
Canopy con Jungo Connect One en la base de 3 pines - Jungo Lighting
Jungo Connect One Occupancy and daylight sensor factory-installed on the 3-pin receptacle, with zone rules from the app or the web. I VERSION · FACTORY-INSTALLED
Canopy suspendida en tubo de 1 in - Jungo Lighting
Pendant pipe mount For open structures or taller canopies: hang it from a 1 in pipe and secure it with the safety cable. 1 IN PIPE NOT INCLUDED

06 — FOR SPECIFIERS

Everything to specify it.

Compliant and verifiable.

Download the spec sheet, the installation guide and the 8 IES files (4 models × 2 CCTs) for your DIALux or AGi32 layout.

07 — FAQ

About the Canopy

Have another question? An advisor will answer you on WhatsApp.

How do I choose the model, CCT and controls?

When ordering, with the code CL-[model]-[CCT]-[controls]: SO 75 W, MO 100 W, HO 130 W or SHO 150 W; 40 (4000 K) or 50 (5000 K); N for no controls or I for factory-installed Jungo Connect One. There are no field selectors.

Can it handle the weather?

Yes, in wet locations: it is IP65 and IK08, the borosilicate glass optic withstands heat and UV, and it operates from −22 to 122 °F.

Can the Canopy be controlled with Jungo Connect®?

Yes. The I version ships with the Jungo Connect One sensor factory-installed on the 3-pin receptacle: occupancy sensing, daylight harvesting and zone rules from the app or the web platform.

Is it TAA and USMCA compliant?

Yes. The Canopy is TAA compliant and USMCA compliant, and it ships duty-free under USMCA.

What mounting height is it for?

Mounting heights under 20 ft: fuel and diesel stations, underground and covered parking garages, covered loading docks and industrial park gatehouses. We run a free photometric layout for your project.

08 — COMPLETE YOUR PROJECT

Related products

View all Indoor →
Canopy · loop final · gasolinera de noche · póster - Jungo Lighting

CANOPY

How many Canopy fixtures does your canopy need?

We run a free photometric layout for every area (fueling islands, parking, loading docks and entrances) and help you choose the right model, CCT and controls.

Jungo Lighting® es una marca de Jungo Industries, S.A.P.I. de C.V. · Monterrey, Nuevo León, México Jungo Lighting® is a brand of Jungo Industries, S.A.P.I. de C.V. · Monterrey, Nuevo León, Mexico